PCE-TG 300-P5EE: Ultrasonic Thickness Gauge (600 mm ) w/ 5Mhz - 10mm dia Probe for thru coating measurement
DESCRIPTION
The PCE-TG 300-P5EE is an
ultrasonic thickness gauge with special sensors for various applications. In
general, the wall thicknesses of all homogeneous materials can be measured with
the thickness meter. For damping or scattering materials such as plastic or
cast a special sensor is available. An angled 90° sensor also enables
measurements at hard-to-reach measuring points. The speed of sound can be set
freely on the thickness meter and thus adapted to a wide variety of materials.
The measured values are
displayed directly on the easy-to-read TFT color display. Due to the internal
memory, which can be read out via the optionally available software, different
measuring points can be clearly stored. The non-destructive ultrasound measuring
method enables the measurement even on end products. Thanks to the Echo-Echo
working mode, even coated workpieces can be measured.
HIGHLIGHTS
- Large measuring range
- Various sensors available
- Battery operation
- Error and voids detection
- Internal measurement data memory
- Print via Bluetooth
SPECIFICATION
|
PCE-TG-P5EE sensor |
|
|
Measuring range |
P-E: 2 ... 600 mm / 0.078 ...
23.62", E-E: 2.5 ... 100 mm / 0.098 ...3.937" |
|
Minimum diameter of
pipes |
20 x 3 mm / 0.787 ...
0.118" |
|
Frequency |
5 MHz |
|
Diameter |
10 mm / 0.39" |
|
Description |
normal measurement and E-E test |
|
PCE-TG 300-P5EE device |
|
|
Measuring range |
P-E: pulse-echo mode 0.65 ...
600 mm / 0.025 ... 23.62" (steel) |
|
|
E-E: Echo-Echo mode 2.50 ...
100 mm / 0.098 ... 2.36" |
|
Accuracy |
±0.04 mm H[mm] (<10 mm);
±0.4 % H[mm] (>10 mm) |
|
|
H refers to the material
thickness of the workpiece |
|
Resolution |
0.1 mm / 0.01 mm / 0.001 mm
(adjustable) |
|
Measurable materials |
metals |
|
|
plastics |
|
|
ceramics |
|
epoxy resin |
|
|
|
glass |
|
|
and all homogeneous materials |
|
Working modes |
Pulse-echo mode (fault and void
detection) |
|
|
Echo-echo mode (hide layer
thicknesses, e.g. paint) |
|
Calibration |
sound velocity calibration |
|
|
zero calibration |
|
|
two-point calibration |
|
View Mode |
Normal Mode, Scan Mode,
Difference Mode |
|
Units |
mm / inch |
|
Data transfer |
printing via Bluetooth / USB
2.0 |
|
Memory |
non-volatile memory with 100
data groups with 100 data sets each |
|
Operating time |
continuous operation 100 h |
|
|
automatic stand-by mode
(adjustable) |
|
auto power off mode
(adjustable) |
|
|
Power supply |
4 x AA battery 1.5 V |
|
Display |
320 x 240 pixels TFT LCD color
display with brightness adjustment |
|
Operating conditions |
0 ... +50 °C / 32 ... 122 °F,
≤80 % RH non-condensing |
|
Storage conditions |
-20 ... +70 °C / -4 ... 158 °F,
≤80 % RH non-condensing |
|
Dimensions |
185 x 97 x 40 mm / 7.2 x 3.8 x
1.5" |
|
Weight |
375 g / 13.2 oz |