Fluke 27 II Rugged Digital Multimeter

The standard for rugged

The Fluke 27 II Digital Multimeter define a the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15°C to +55°C (5°F to 131°F, -40°C for up to 20 minutes) and 95% humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.

• • Measure up to 1000 V AC and DC
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 200 kHz
  • Extended AC voltage bandwidth – 40 Hz to 30 kHz 
  • Resistance, continuity and diode test
  • Min/Max and average recording to capture variations automatically

• Accuracy Specifications
  DC voltage	Range	0.1 mV to 1000 V
  	Accuracy	0.1% + 1
  AC voltage	Range	0.1 mV to 1000 V
  	Accuracy	0.5% + 3
  DC current	Range	0.1 μA to 10 A
  	Accuracy	0.2% + 4
  AC current	Range	0.1 μA to 10 A
  	Accuracy	1.5% + 2
  Resistance	Range	0.1 Ω to 50 MΩ
  Display counts	6000
  Capacitance	1 nF to 9999 μF
  Frequency	0.5 Hz to 199.99 kHz
  Compliance	CAT IV 600 V , CAT III 1000V
  IP rating	IP 67
  Power	Three AA batteries
  Battery life	800 hours
  General Specifications
  Display	Bar graph/backlight	Yes/Yes
  Data storage	Min/Max/Avg	Yes
  	Reading hold	Yes
  Other features	Relative readings (zero)	Yes
  	Battery type	Three AA batteries
  Warranty and protection	Safety rating	CAT IV 600 V/CAT III 1000 V
  	Mine safety	MSHA Approved
  	External protection	Rubber holster
  	Drop test	10 feet drop test
  	Dustproof/waterproof	Yes, IP 67 rated
  	Warranty	Limited lifetime
  	Size (H x W x L) with holster	6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in)
  	Weight with holster	698.5 g (1.54 lb)

  Title
  Fluke 27/28 II Data Sheet	Download