Fluke i400s AC Current Clamp

Fluke current clamps extend the current ranges of digital multimeters, power quality analyzers, and portable oscilloscopes and are available for both AC and AC/DC environments. The Fluke i400s is specially designed to offer maximum utility in a compact shape and is the only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.

• High safety AC Current Clamp with BNC output

  • Companion to your scope or power quality meter to measure up to 400 A AC
  • Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
  • Specially designed to offer maximum utility in a compact shape
  • Take accurate current readings without breaking the circuit
  • Soft non-slippery overmold handle
  • Optional PM9081/001 BNC/Banana adapter for DMM's
  • Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
  • Max. conductor Ø 32 mm

• Specifications
  Nominal current range	40 A Range	0.5 A to 40 A
  	400 A Range	5 A to 400 A
  Basic accuracy	40 A Range	2% + 0.015 A (45-400 Hz)
  	400 A Range	2% + 0.04 A (45-400 Hz)
  Phase shift	40 A Range
  	0.5 to 1 A	Unspecified
  	1 A to 5 A	4°
  	5 A to 10 A	3°
  	10 A to 20 A	3°
  	20 A to 40 A	2°
  	40 A to 400 A	NA
  	400 A Range
  	0.5 to 1 A	NA
  	1 A to 5 A	NA
  	5 A to 10 A	Unspecified
  	10 A to 20 A	2°
  	20 A to 40 A	2°
  	40 A to 400 A	1.5°
  Typical bandwidth	40 A Range	5 Hz - 10 kHz
  	400 A Range	5 Hz - 10 kHz
  Output level(s)	40 A Range	10 mV/A
  	400 A Range	1 mV/A
  Crest factor	40 A Range	≤ 3
  	400 A Range	≤ 3 to 300 A
  		≤ 2.5 to 400 A
  Safety Specifications
  Safety	CAT IV, 600 V, CAT III, 1000 V
  Maximum non-destructive current	1000 V AC
  Mechanical and General Specifications
  Warranty	1 year
  Maximum conductor size	32 mm (1.25 inches)
  Output cable length	2.5 m (8.2 ft)
  BNC adapter	Yes
  Dimensions	150 x 70 x 30 mm
  Weight	114 g