Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0 % to 75 %. Accuracy specifications take the form of: ±([% of Reading] + [Number of Least Significant Digits])
| Accuracy Specifications | AC Volts
(40 Hz to 500Hz)1 | Range | Resolution | Accuracy | 6.000 V
60.00 V
600.0 V | 0.001 V
0.01 V
0.1 V | 1.0 % + 3 | | DC Volts | 6.000 V
60.00 V
600.0 V | 0.001 V
0.01 V
0.1 V | 0.5 % + 3 | | AC Millivolts | 600.0 mV | 0.1 mV | 3.0 % + 3 | | Diode Test2 | 2.000 V | 0.001 V | 10 % | Resistance
(Ohms) | 400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ | 0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ | 0.5 % + 3
0.5 % + 2
0.5 % + 2
0.5 % + 2
0.5 % + 2
1.5% + 3 | | Capacitance3 | 50.00 nF
500.0 nF
5.000 μF
50.00 μF
500.0 μF
1000 μF | 0.01 nF
0.1 nF
0.001 μF
0.01 μF
0.1 μF
1 μF | 2 % + 5
2 % + 5
5 % + 5
5 % + 5
5 % + 5
5 % + 5 | Frequency4
Hz
(10 Hz – 100 kHz) | 50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz | 0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHz | 0.1 % + 3 | | Duty Cycle4 | 1 % to 99 % | 0.1 % | 1 % typical 5 | AC Current
(40 Hz to 200 Hz) | 4.000 A
10.00 A | 0.001 A
0.01 A | 1.5 % + 3 | | DC Current | 4.000 A
10.00 A | 0.001 A
0.01 A | 1.5 % + 3 | - All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
- Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.
- Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 50 nF range).
- All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
- Typical means when the frequency is at 50 Hz or 60 Hz and the duty cycle is between 10 % and 90 %
| | Function | Overload Protection | Input Impedance (Nominal) | Common Mode Rejection Ratio | Normal Mode Rejection Ratio | | AC Volts | 600 V 1 | >10 MΩ <100 pF 2 | >60 dB at dc,
50 Hz or 60 Hz | − | | AC Millivolts | 600 mV | >1M, <100 pF | >80 dB at 50 Hz or 60 Hz | − | | DC Volts | 600 V 1 | >10 MΩ <100 pF | >100 dB at dc,
50 Hz or 60 Hz | >60 dB at 50 Hz or 60 Hz | - 6 x 105 V Hz Max
- For mV (AC), input impedance is approximately 1 MΩ.
| | General Specifications | | Maximum Voltage Between any Terminal and Earth Ground | 600 V | | Display (LCD) | 6000 counts, updates 3/sec | | Battery Type | 2 AAA, NEDA 24A, IEC LR03 | | Battery Life |
|
|
|
|
