PCE-CT 80HP-F5N3: High Precision Coating thickness gauge with high range Fe: 0 -5000 μm/NFe: 0 -3000 μm w/ meas area Ø17 mm
DESCRIPTION
The coating thickness gauge can
reliably determine the thickness of, for example, plastics, paints and other
coatings on ferrous and non-ferrous metals. With a measuring range of up to 0
... 5000 µm on ferrous metals, the coating thickness gauge covers a wide range
of measuring tasks. Because of the accuracy of up to ±(1.0% of mv. + 0.5 µm),
the coating thickness gauge is a very precise measuring device. The sensor on
the coating thickness gauge has a V-groove. Thanks to this V-groove, it is
possible to carry out measurements on convex surfaces with the coating
thickness gauge. In addition to the convex surfaces, measurements can also be
carried out on concave surfaces with the coating thickness gauge.
HIGHLIGHTS
- Practical V-groove on the measuring heads
- High accuracy for small coatings
- Adjustable limit values
- Data memory for 2000 readings
- Measuring range of up to 0 ... 5000 µm
- Optionally with ISO calibration certificate
SPECIFICATION
|
Measuring range |
Fe: 0 ... 5000 µm, NFe: 0 ...
3000 µm |
|
Accuracy after foil calibration |
±(1.5 % of measured value + 1
µm) |
|
Accuracy after zeroing |
±(1.75 % of measured value + 1
µm) |
|
Probe diameter |
Ø17 mm / 0.67" |
|
|
|
|
Resolution |
0.1 µm (<100 µm), 1 µm
(>100 µm) |
|
Measurable materials |
|
|
Fe substrates such as: |
Fe substrates such as: steel
and iron |
|
NFe substrates such as:
|
NFe substrates such as:
aluminum and copper |
|
Min. radius of curvature convex |
5 mm / 0.19" |
|
Min. radius of curvature
concave |
25 mm / 0.98" |
|
Min. measuring surface |
Ø17 mm / 0.67" |
|
Min. layer thickness |
0.2 mm / 0.007" (on
magnetic materials) |
|
0.05 mm / 0.002" (on
non-magnetic materials) |
|
|
Probe mode |
Auto material detection mode
(Fe + NFe) |
|
|
Magnet mode (Fe) |
|
|
Eddy current mode (NFe) |
|
Calibration |
Multi-point calibration |
|
|
(1 ... 4 points for each group) |
|
|
Zero calibration |
|
Units |
µm, mm, mils |
|
Data transfer |
USB 2.0 |
|
Memory |
A volatile measurement group
(DIR mode) |
|
|
Four measurement groups with
autom. |
|
|
storage and max. 2000 readings
(GEN mode) |
|
Statistics functions |
Number of measured values,
mean, |
|
|
minimum, maximum, standard
deviation |
|
Alarm |
Display when the adjustable
value is exceeded |
|
|
upper and lower alarm limit |
|
Automatic shutdown |
auto. shutdown mode (3 min.) |
|
Power supply |
3 x 1.5 V AAA batteries |
|
Display |
128 x 128 px LCD display |
|
Additional displays |
battery status, error detection |
|
Operating conditions |
0 ... +50 °C / 32 ... 122 °F |
|
|
20 ... 90 % RH non-condensing |
|
Storage conditions |
-10 ... +60 °C / 14 ... 140 °F |
|
|
20 ... 90 % RH non-condensing |
|
Dimensions |
143 x 71 x 37 mm / 5.6 x 2.8 x
1.4" (L x W x H) |
|
Weight |
with sensor and batteries: 271
g / 9.5 o |