Suitable for fire alarm system, Fire resistant cabling site and many other
Applications where a Low Smoke & Zero Halogen cable is required
Special fire alarm/fire resistant cable is LPCB approved & Complies with standards:
BS 6387:2013 CWZ
*C = for 180 minutes (3 hours) at 950°C (up to ±40°C) fire only.
*W = for 30 minutes at 650°C (up to ±40°C) fire with water spray applied for final 15 minutes.
*Z = for 15 minutes at 950°C (up to ±40°C) with fire & mechanical shock applied every test
EN 50200:2015 PH30, PH60 & PH120 & EN 50200:2015+Annex E 30 mins
*For 30 & 120 minutes (2 hours) at 830°C (up to +40°C) fire & mechanical shock applied every 5 minutes throughout the 30 & 120 minutes test.
EN 60754-1:2014 Zero Halogen Emissions
Emission of less than 0.5% of corrosive & acid gas when under fire conditions
A flame of
1kw of caloric power is applied for 30 seconds, cable does not propagate fire
EN 61034-2:2005:+A1:2013 Low Smoke Emission
Meeting at least 60% for residual light transmission while cable is under fire conditions.
BS 7629-1: 2015
Core identification/Insulation color code
BS 60228 Inc. Corrigendum 1
ETP1 High Grade Copper
Recommended metal clip spacing 300mm Horizontal 400mm Vertical
Recommended Cable Tray Fastening - Metal Tie, spacing every 1.5 meters.
The cable should not be flexed or bent when either the cable or operating temperature is
Below the minimum or above the maximum installation temperatures.
Plastic clips or ties must not be used as the sole means of support for fire cable.
Easy to Install and Superb Working Flexibility
Up to 12 Twists per meter for Data Protection
Red outer sheaths available and White & Black on request
2 core 1.5mm2 & 2.5mm2 available & 3 or 4 core on request
0.50mm2, 0.75mm2, 1.00mm2 & 4.0mm2 size conductor on request
500m is standard Reel length and 100m, 200m, 305m reel on request
10 years warranty from manufacturing date
*MOQ condition will apply on “on request” items